^^^this^^^
Small base dies will correct the problem if you have a very tight chamber.
The upside to a tight chamber is they tend to be more accurate, figure out your leade (freebore), modify your seating length as appropriate, and you have a tackdriver.
The downside is small base sizing tends to reduce the life of your brass.
If I were you, I would pick up a few boxes of factory ammo from different manufacturers and try them one box at a time. Note any brands that do not chamber.
If all factory ammo will not chamber, contact PSA, you have an undersized chamber per SAAMI specifications.
__________________
There are no dangerous weapons; there are only dangerous men.
To speak without thinking is to shoot without aiming.
|