mine is a "Universal Power tool stand" from home depot. Has a 32" height. I took off the included top, and replaced it with two layers of 3/4" oak plywood. My stand has a metal shelf underneath, so I didn't bother to replace the cheap fiberboard. On the unit below, I would definitely replace the fiberboard with 3/4 plywood.
http://www.homedepot.com/p/POWERTEC-...1002/206768003
On top of the new table (which measures 16 x 36") I added a 6 x 20 x 12" high steel loading bench riser, which I got from Berry's at the Nashville NRA convention a couple years back. It's called a Berry's Bench Topper.
https://www.natchezss.com/berry-s-bench-topper.html
So.... my turret press and powder measure are mounted at a height of 43-44" which is a perfect height for me!
Michael
__________________
COTEP: CBOB578
DW CCO
SIG GSR 1911
SA Micro Compact
and a spectacular cast of others!
"You have never lived, until you have almost died. And for those who fight for it, life has a flavor that the protected will never know." Guy de Maupassant, 1893.
Anonymously, penned on a sign at a command post at Khe Sanh, RVN.
Last edited by DaFadda; 06-22-2017 at 09:15 AM.
Reason: Additional information
|