Built my own Reload Bench.

[Deleted]

After searching and seeing the prices for Benches, I decided to build my own.

And for less then $80 this the end result. (Biggest cost was Plywood and peg board.)

Specs: 6' tall 32" high at the bench,5' wide and 24" deep. Small Shelf on top which i will put a 4' 2 bulb Fluorescent light, with switch and 2 plugs.

I put Peg Board on the back and used 1/2 plywood (local lumber yard out of 3/4).

Took about 5 hours time (have the GrandBaby this weekend so had to help Grandma or suffer her Wrath.)






Once I install the light I'll post the Pics.

Thanks for looking Ed