Sight Adjustment

[RandallZ]

Originally Posted by m60g

Do you need to take the screw out of the sight, or just loosen it?

Just loosen it a bit. It doesn't go into the slide, just presses against the dovetail flat to keep the sight in place.

[m60g]

What sight tool works with the DW

[Pawpaw]

Originally Posted by m60g

What sight tool works with the DW

If my experience is any example, you may not need one.

I discovered the rear sight had come loose on my V-Bob. In fact, I was able to slip it all the way out the left side of the slide.

After I put it back in, it tightened right up with the allen screw.

[RandallZ]

Originally Posted by m60g

What sight tool works with the DW

I dunno...I do it old school style with a brass drift and hammer.