COTEP.org  

Go Back   COTEP.org > Main Category > Main Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 09-09-2016, 11:41 PM
Gatorade's Avatar
Gatorade Gatorade is offline
COTEP Member
 
Join Date: May 2014
Posts: 2,615
Thanks: 802
Thanked 643 Times in 156 Posts
Default

I usually see it on .38/.357 but occasionally I will see it on .45 and 9mm. I don't recall it on .40 or .32
__________________
CBOB0746
NRA Life Member
Florida CWL Since 1992
Reply With Quote
  #2  
Old 09-10-2016, 08:26 AM
DaFadda's Avatar
DaFadda DaFadda is offline
Founding Member
Super Moderator
 
Join Date: Dec 2011
Location: Nashville Tennessee
Posts: 3,360
Thanks: 665
Thanked 611 Times in 169 Posts
Default

From Corbin.com, maker of the Corbin Hand Cannelure HCT-1:

"Cannelures can be used for crimping grooves, for identification of certain bullet weights or designs, or (applied to the case) as a method of preventing a bullet from being pushed back into the case during the feeding cycle. This is especially effective on cartridges that headspace on the end of the case, such as the .45 ACP. "

I have had bullets setback... aka push back into the case during feeding before, if the seating die didn't have quite enough of a taper crimp set. You might see that the first round in your EDC magazine gets a bit shorter after being fed and removed every day for a month or so? That's why it is suggested that we rotate the cartridges on a regular basis, and that we shoot and replace our carry rounds on a regular basis. A case cannelure prevents the bullet from pushing into the case during FEEDING, not just during the initial loading or reloading process.

If my memory is correct, I believe that there was a time when you could get custom wheels for your canneluring tool, for the purposes of identifying your own brass during and after a competition. (that would be back in the 70's and 80's). Others have used magic marker or nail polish to do the same thing.

All this said... If you want to .... Cartridge manufacturers such as Starline will make a custom headstamp for you.... for a price of course. I can't seem to find a actual cost though. Smaller companies will do specialty headstamps also. Qual-Cart.com will do as little as 1000 pieces, again.... for a price.

could you imagine: A headstamp that says "Cotep 45ACP"? Or your initials? No trouble finding your brass at the range!

Da
__________________
COTEP: CBOB578
DW CCO
SIG GSR 1911
SA Micro Compact
and a spectacular cast of others!

"You have never lived, until you have almost died. And for those who fight for it, life has a flavor that the protected will never know." Guy de Maupassant, 1893.
Anonymously, penned on a sign at a command post at Khe Sanh, RVN.

Last edited by DaFadda; 09-10-2016 at 09:34 AM.
Reply With Quote
  #3  
Old 09-10-2016, 01:13 PM
milkmanjoe's Avatar
milkmanjoe milkmanjoe is offline
COTEP Member
 
Join Date: Sep 2013
Location: Fl or SC, wherever my wife banishes me to
Posts: 4,227
Thanks: 736
Thanked 383 Times in 88 Posts
Default

These are about fifteen year old CorBon.38's

__________________
CBOB0716

"The most basic right that we have emanates from our Creator and it is that unalienable right to life. We stand firmly on the principle that from conception until the last breath is drawn, life is sacred.”

Political Correctness is a doctrine, recently fostered by a delusional, illogical minority and promoted by a sick mainstream media, which holds forth the proposition that it is entirely possible to pick up a piece of shit by the clean end!
Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 11:15 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.