|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
02-22-2017, 12:46 PM
|
|||||
|
|||||
Yes, this can be dangerous in a gun if its bad enough. I had this issue as well with my 10mm. While chronographing some loads I was getting very inconsistent numbers. I found than some loads were "deeper" than other causing issues. Careful reloading with proper crimping on straight walled bullets can help but attention to detail is important.
Well said Padre!!
__________________
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode