80% Lower finishing step

[Gatorade]

Originally Posted by RandallZ

May I suggest you use the top plate as a template rather than a guide? If you scribe a line on the 80, then remove the top plate you can use the line as your guide and save the plate from being chewed by the bit or end mill.

Randall

I don't think I could stay inside the lines like that. It was pretty hard cutting as it was. If it were wood that would be easy but with metal I don't have those skills yet. Maybe next one I will give it a try. For the bottom I will remove the top plate and use the inside wall as a guide.