Tuning Extractors and Extended Ejectors

[Rick McC.]

That’s a great write up my Mr. Waits!

:

As an FYI, when you get to taking the extractor half way out and start to bend it; you aren’t going to break it. It takes more force than you’d think to bend it.

I actually remove the extractor, and put it back in the slide backwards, with the hook facing out. I then use my thumb to put force on the extractor to bend it. That works better for me than the standard way.

[Caleb]

Originally Posted by Rick McC.

That’s a great write up my Mr. Waits!

:

As an FYI, when you get to taking the extractor half way out and start to bend it; you aren’t going to break it. It takes more force than you’d think to bend it.

I actually remove the extractor, and put it back in the slide backwards, with the hook facing out. I then use my thumb to put force on the extractor to bend it. That works better for me than the standard way.

Thanks for the tip! I haven’t had time to fool around with it yet but, I’ll keep you all posted on the results.


Sent from my iPhone using Tapatalk