Powder recommendation

Boats · #1 09-30-2012, 07:09 PM

I've recently started reloading for .45 and have been using Unique through a Lee Auto Disk Pro using the micrometer disk on a Lee Turret press.

I don't like the way it feeds - I can't seem to get accurate and uniform drops with this powder. It probably varies by about +/- .3gr

I'd hate to think it was the feeder, though I admit it's possible. Do you all have problems feeding Unique?

What powder feeds uniformly for you if you use a Lee Auto Disk Pro?

I've been using 230gr JHP over 6.0gr of Unique.

sdmc530 · #2 09-30-2012, 07:58 PM

I can't speak for your specific set up but I use Winchester 231 powder for my pistol loading. I really like it, very consistent when using an auto type dispenser. I don't get off more than .1 from my loads. I think that is pretty accurate but I am no expert. I like 231 because the min to max range is pretty high so if a min is 5.4 and the max is 6.2 if your dispenser is set at say 5.6 I am never off by more than.1 5.5-5.7. I am pleased with that result.

Not sure if I helped but I can not give an opinion, I am an American.

Boats · #3 09-30-2012, 08:14 PM

Quote:

Originally Posted by sdmc530

I can't speak for your specific set up but I use Winchester 231 powder for my pistol loading. I really like it, very consistent when using an auto type dispenser. I don't get off more than .1 from my loads. I think that is pretty accurate but I am no expert. I like 231 because the min to max range is pretty high so if a min is 5.4 and the max is 6.2 if your dispenser is set at say 5.6 I am never off by more than.1 5.5-5.7. I am pleased with that result.

Not sure if I helped but I can not give an opinion, I am an American.

Of course it helped! Any information helps at this point... the more the better.

I've never used 231 but I know there are lots of people who swear by it. I guess the question is does it provide accurate drops with my Lee stuff?

Thanks!

sdmc530 · #4 09-30-2012, 08:30 PM

I use the lee powder measure, the little red plastic one that you flip the handed up and down. Has the screw measure adjuster on the back of the handle....Not sure if this the one you use. I still load on my Lee classic single stage and love it.

I only use 231 because I think its an easy powder to use and go bang every time. OH yea its my price too about $21 a pound!

Semper Paratus · #5 09-30-2012, 09:00 PM

Unique has its own challenges metering. Absolutely the best, I've used, in that burn rate range is AA #5....super consistent. What I'm currently using is Universal Clays (Universal). Meters well and is a lot cleaner than Unique once you hit the upper ends of the range. If you are looking for powder puff loads 231, Clays, AA#2, Bullseye are all stuff I've used to good affect. I used to load a ton of stuff with Red Dot and 700X (.38, .357, 45 ACP 12 Ga). In those days we had a small one bedroom apartment so stowage was at a premium so I selected multipurpose powders for the shot gun and hand gun. Used 4064 for the 30-'06

AutoMag · #6 09-30-2012, 09:04 PM

I use Winchester 231 for the majority of my handguns and Winchester 296 for the larger calibers.

DaFadda · #7 09-30-2012, 09:44 PM

Universal Clays here. Although I have Bullseye, Unique, Powerpistol and Titegroup all on the shelf. Universal just seems to work on almost everything. Meters nicely, relatively clean burning. For a while I thought it made my shooting more accurate.... but then...... I realized.

"I'm just THAT good." Buwwwwwaaaahhhhhhh!

Da