COTEP.org  

Go Back   COTEP.org > Main Category > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2011, 04:18 PM
svandamme's Avatar
svandamme svandamme is offline
Founding Member
COTEP Member
 
Join Date: Sep 2011
Location: Belgium , In Flanders Fields where the poppies blow
Posts: 112
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Took half a day off work to go shooting and drinking beer (after shooting)

The handloads were way to weak.. gun did not cycle, hardly any recoil.
I could see the bullet fly, drop, and bounce off the ballistic plates at the back of the range.. they were terribly slow. It was more "plop" then "blam"

Guess the dude in the shop was right, the Accurate #7 load table is the right one.
But better safe then sorry, so it's all good.



And when i arrived home, had a present waiting for me... The strongmount arrived.
Obviously i got cracking and bolted the thing up.



It's a great piece of kit, even when just bolting the press to the mount, not even bolting the mount to the bench, it was incredibly stable... bolting it to the bench.. well, rock steady is the word.

Powder check is up there as well, so friday imma be loading some more..
6-7 was totally weak... so gonna load a spread from 8 to 9.5 at .1 grain steps to see where the gun starts to cycle Once it cycles, i'll run a bigger batch ranging in the ball park, to see what feels good to shoot.

Oh, and i found a supplier of Vihtavuori so next time, no more powder misteries just the good stuff.
__________________
Stijn Vandamme
08 Dan Wesson PM7-45 < > COTEP PM70562
Ypres , Belgium , Euh-rop
Reply With Quote
  #2  
Old 11-30-2011, 05:11 PM
dennisc's Avatar
dennisc dennisc is offline
Founding Member
COTEP Member
 
Join Date: Sep 2011
Location: Florida
Posts: 66
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Stijn,
Great looking set-up, and even better news about the Vihtavuori powder.
Sounds like everything is coming together just fine - congratulations.
Dennis
__________________
DC
USAF (Ret)
COTEP CBOB0529
Reply With Quote
  #3  
Old 12-02-2011, 04:16 PM
svandamme's Avatar
svandamme svandamme is offline
Founding Member
COTEP Member
 
Join Date: Sep 2011
Location: Belgium , In Flanders Fields where the poppies blow
Posts: 112
Thanks: 0
Thanked 0 Times in 0 Posts
Default

got the Vihtavuori N340 powder, case lube, also some HN 230 grain ball bullets so i can try some different things...(other was HN 195 grain Semi Wadcutters).


Gonna run the tumbler tomorrow morning, load up a test batch 'round noon and head to the range in the afternoon.
__________________
Stijn Vandamme
08 Dan Wesson PM7-45 < > COTEP PM70562
Ypres , Belgium , Euh-rop
Reply With Quote
  #4  
Old 12-02-2011, 05:14 PM
Grizzman Grizzman is offline
Founding Member
COTEP Member
 
Join Date: Apr 2011
Location: Shawnee, KS
Posts: 527
Thanks: 18
Thanked 20 Times in 4 Posts
Default

Vigtavuori N340 is slower than unique, but faster than Accurate #7 or Longshot. That should work out just fine.

My Sierra manual shows a maximum charge of 6.8 grains with 230s. This should be around 900 fps.

My Hornady book shows 6.7 as the maximum charge at 900 fps, so I'd say this is solid info.

Have fun, and load safe.

__________________
COTEP #CBOB0353
Happiness is a warm, dirty gun.
Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.