![]() |
|
Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
![]() |
![]() |
![]() |
#6
|
|||||
|
|||||
![]()
Just a little on the Gun
It is a S&W 986 7 shot 9mm It has an APEX competition Hammer and APEX extended competition firing pin The DA NOW is 6#'s *when it came from S&W it was close to 13 or 14 #'s. The grip was made for me by Hogue...with a smaller wood base, for a faster draw and on the gun The sight is an Eotech XPS2.0 The internal lock system has been removed and the cylinder latch has been changed to a Hogue competition latch Now if only S&W would make a gun like this ![]() But we can rebuild it and make it better ![]() ![]()
__________________
NRA-LIFE,COTEP, USPSA,STEEL CHALLENGE,SASS,GSSF, ICORE GLOCK Certified Armorer |
Thread Tools | |
Display Modes | |