Powder PSI

[Gatorade]

Originally Posted by milkmanjoe

And this is a reason I asked about powder compression. Reading the boards some guys complain about using powders that require them to damn near jam the bullet in to get the desired OAL. So, as I'm reading this, I'm thinking about the PSI of packed powder. I'm sure this all has to do with burn rates in some way to max out the load.

Remember you are talking about 3 different variables here.

1 Powder
2 Bullet
3 OAL

Not all 150 ge bullets are the same length. Not all powders have data for all calibers and OAL is dependent upon the bullet length and the powder charge. That is why different powders have different OAL for one bullet and may have a different OAL for the same bullet with a different powder charge.