Casting .38 and 9mm

[sdmc530]

see told you he was an expert. can do anything!

[Gatorade]

Funny you should bring up the Ruger. That is the exact gun I have. I have another .38 revolver and a 9mm semi auto so I was thinking I could reload for all three with one mold. I will probably get other molds down the line but would be happy if I could get up and running for two calibers with one mold.

[Lonestar grips.]

Originally Posted by sdmc530

see told you he was an expert. can do anything!

if only that were true.

Originally Posted by Gatorade

Funny you should bring up the Ruger. That is the exact gun I have. I have another .38 revolver and a 9mm semi auto so I was thinking I could reload for all three with one mold. I will probably get other molds down the line but would be happy if I could get up and running for two calibers with one mold.

I would take your Ruger to a smith that has pin gauges and see what the throats are running in your cylinders. you can do it with calipers or a known size jacketed bullet but it won't be as accurate as a pin gauge. once you know that you can then choose a mold and sizing die that fits your needs.

also i'd look into Lee Molds. you can get double cavity molds with the handles for around $22. six cavity molds run about $35 and usually don't include the handles. in the long run that would be the simpler/easier way to go.

http://www.amazon.com/Lee-Precision-...ords=lee+molds

http://www.amazon.com/Lee-Precision-...ords=lee+molds

[Gatorade]

I ended up ordering a 158gr .358 mold. I was trying to get away from Lee molds, I have RCBS molds and steel is just flat out better. My .451 Lee mold dropped the retaining pin and now I need to send it to Lee to get repaired. So I haven't been happy with the Lee quality, but that cheap price gets me every time! $21.99 and a $3.99 Delta dart gets me a set of molds delivered with no shipping fees!

I draw the line at dies though. I am swearing off Lee dies forever and am sticking with Hornady from now on. Hornady dies are on sale $39.99 for a 3 die Titanium set with storage box, extra Decapping pins, adjustment Allen keys and RN and FN seating inserts. Lees carbide are only $7 less and not nearly as good quality and come with a completly useless powder scoop. Also for the rest of the year you get 100 free Hornady bullets with the purchase of a New Diminsion die set. I usually get .308 because those are $33/100. So a set of top quality dies with useful extras and $33 worth of top quality bullets for $40.00. You can't beat that at all!

I really need to save some money up for an RCBS lubriszier and you won't be able to wipe the grin off my face! Sizing and hard living in one step with no mess!

https://www.midwayusa.com/product/18...rain-flat-nose

[DrHenley]

I don't cast for 9mm or 38 Special, but I do for 45 ACP and 45 Colt. Similar situation because 45 ACP generally is .451" and 45 Colt is .452".

I have tried using round nose 45 ACP cast bullets in the 45 Colt, and the accuracy was very poor. However, SWC 45 Colt bullets were very accurate in the 45 ACP, but there were feeding problems in some of my 1911s, in particular my Dan Wesson Panther, which would not feed them at all, they just stick on the feed ramp (every other bullet feeds flawlessly). They feed fine in my Colt Series 80 and in my Sig Ultra.

So, long story short, it's worth a try, but mileage may vary... Generally, it is better if the bullets fit the 38 Special groove diameter, they can be one or two thousandths large and still work fine in the 9mm. The .358" die is fine if it actually drops .358" bullets or larger. Dropping at .359" is better. That will depend on the alloy you use. More antimony in the alloy will make drop larger.