lube for the slide rails

Dave Waits · #1 10-07-2011, 05:05 PM

Plastilube doesn't sweat out friend, just apply like the photo and work the slide about four times. Then, take a patch and wipe off the rear of the gun at the slide on both sides of the Hammer.

BTW, you mention German cars, BMW uses Plastilube exclusively in all it's high-friction areas.

svandamme · #2 10-07-2011, 05:36 PM

i think i probably have some Plastilube laying around here somewhere, for use on the back of brake pads so the piston doesn't cause brake squeel as it rotates on the pad.

BadOscar · #3 10-07-2011, 06:49 PM

Dave,
Where do you get your plastilube? It looks like it comes in different grades or thicknesses. Are you using the thinnest "0" grade stuff?

Sheepdog · #4 10-08-2011, 02:20 AM

Quote:

Originally Posted by BadOscar

Dave,
Where do you get your plastilube? It looks like it comes in different grades or thicknesses. Are you using the thinnest "0" grade stuff?

I use Mobil 1 thicker seems to work better. I also soak them in Kroil when new. Have used Mobil 1 sense my first SS lock up with Rem oil, to lite. I put Mobile one in needle oil bottles works great and cheap compared to this other stuff. But then again I use Hoppies #9.

Dave Waits · #5 10-08-2011, 02:47 PM

Quote:

Originally Posted by BadOscar

Dave,
Where do you get your plastilube? It looks like it comes in different grades or thicknesses. Are you using the thinnest "0" grade stuff?

Alex, you see it all the time at Gunshows and probably don't realize it. Almost all the tables that sell American Milsurp parts have a box containing little clear tubs with yellow caps full of brown grease. Usually two for a dollar, that's Plastilube! Three dollars worth will last a year or so!

Sheepdog · #6 10-08-2011, 08:34 PM

I am going to give it a try. I have never heard of it. Thanks Dave

AutoMag · #7 10-08-2011, 11:05 PM

You can also try Brian Enos's Slide-Glide, great stuff if I do say so myself!!!

AutoMag · #8 10-08-2011, 11:13 PM

I forgot to mention that MILITEC-1 is an excellent choice also, man how did I forget that one!!!!!

Daedalus · #9 10-13-2011, 07:28 PM

I've never used the Molykote spray but have used their high temp silicon bearing grease on my Springfield 1911 one day when I was doing a LOT of shooting (my usual drink is Militec-1 oil). The Molykote stayed in, didn't melt down and everything worked. The Militec-1 is a great oil, and they also have a grease I have not tried, but my thought was a grease for all-day shooting might be better.

Why the Molykote silicon bearing grease? The very unscientific answer is simple: I had some on the shelf!