New Gun Closet

[edgehill]

So we got the panels installed today. Since there were very few studs in these walls, we used plywood to attach them securely. Now just need to start configuring them.


Keypad lock


Small panels on the side and large panels in the back and side. I have room to add two large panels below the small ones if I need them later. We started them about 10 inches off the floor (trim is 4” and we started 6” above that). So the tall panels come up to just over 6 feet tall.


Here’s a basket to show how they snap in place.

So this weekend, I’ll play with the configuration and see what I end up with.